Smart Swing Barrier Mechanism PVC Arm 2.00 Thickness Speed Gates
♦ The Speed Gate RS 716-2 is usually used in bank lobby, office
building, fitness club, school, it prevents
unauthorized people to enter the restricted areas,
♦ The speed gates RS 716-2 are designed to work in a normally closed
mode and retract inside the
pedestal after a valid card has been presented to allow the
authorized user to pass. The fast moving
close behind the authorized person to deter tailgaters.
|Control /Operation Voltage||24VDC +-%20|
|Body||Stainless Steel Body|
|Locking||With 24 V DC electromagnetic brake.|
|Control||24 V DC electronic control board with programming function.|
|Installation||Simple & easy installation with a special pedestal.|
|Led İndicator||Green and Red Indicator Panel|
|Operation Temperature||- 10° C - + 50° C|
|Dimensions (Body)||Ø 170 x 1000 mm|
|Dimensions (Wing)||600 mm|
|Dimensions (Wing)||10 mm|
|glass Weight||35 kg|
1.Equipped with standard input/output signal interface, can be
integrated with all types of access control
panel, offering complete entrance control solutions.
2. Bi-directional passing or single way passing. 3.Equipped with LED
directional indication / status lights.
4.The equipment's running state can be programmed by the built-in
small visual panel on the master
5.In the case of power failure, the rotating arms open automatically
to ensure unblocked access.
6.Mechanical structure can prevent operators from being clamped or
wounded. As a rotating arm is
blocked in the process of reset, the motor will stop working within
the specified time. The arm will reset
again (until it is reset) after defaulted time delay and the
strength is small (≤2Kg).
7.Rotating arm is locked automatically before receiving an opening
8. Automatic reset: if a person fails to pass within the specified
time after the turnstile is opened, the
system will cancel authorization of this access automatically;
9.Highly durable design ensures the life span more than 5 million